Mitutoyo 500-196-30 Advanced Onsite Sensor AOS Absolute Scale Digital Caliper, 0 to 6″/0 to 150mm Measuring Range, 0.0005″/0.01mm Resolution, LCD


Mitutoyo 500-196-30 - Advanced onsite sensor AOS electromagnetic inductive sensor for resistance to dirt, oil, and water. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. Digital readout LCD shows inch or metric units for versatility when measuring. Except 500-500-10, 500-501-10, 500-502-10

Includes protective case and SR44 silver oxide battery. Measures inside, outside, depth, and step values for versatility. Digital calipers are commonly used in fields such as metalworking, machining, carpentry, mechanical engineering, and medicine. Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems.

Mitutoyo 500-196-30 Advanced Onsite Sensor AOS Absolute Scale Digital Caliper, 0 to 6"/0 to 150mm Measuring Range, 0.0005"/0.01mm Resolution, LCD - An additional depth probe slides along the beam to take depth measurements. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. The mitutoyo 500-196-30 digital caliper has a 0 to 6" 0 to 150mm measuring range with 0

0005" 001mm increments for precision and an advanced onsite sensor AOS electromagnetic inductive sensor for resistance to dirt, oil, and water. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. With thumb roller.

More information about Mitutoyo 500-196-30

Mitutoyo 293-340-30 Digital Micrometer, Inch/Metric, Ratchet Thimble, 0-1" 0-25mm Range, 0.00005" 0.001mm Resolution, +/-0.00005" Accuracy, Meets IP65 Specifications


Mitutoyo 293-340-30 - Mitutoyo 293-340-30 Digital Micrometer, Inch/Metric, Ratchet Thimble, 0-1" 0-25mm Range, 0.00005" 0.001mm Resolution, +/-0.00005" Accuracy, Meets IP65 Specifications - Ratchet stop to help provide uniform pressure for precise, repeatable measurements. Ingress protection certified IP65 for protection against dust and water. Ip65 waterproof rated. Carbide measuring faces. Supplied in fitted plastic case. Lot of 1 calibrated micrometer measures 0 to 1" 0 to 25mm with 000005" 0001mm resolution and +/- 0

00005" accuracy, for taking outside diameter measurements in harsh workshop conditions. Lcd screen displays in inches and metric units. Ratchet stop. Plastic components are oil-resistant and measuring faces are carbide-tipped for durability. Auto On/Off.

More information about Mitutoyo 293-340-30


Similar products



Mitutoyo 500-197-30 Advanced Onsite Sensor AOS Absolute Scale Digital Caliper, 0 to 8"/0 to 200mm Measuring Range, 0.0005"/0.01mm Resolution, LCD


Mitutoyo 500-197-30 - Digital calipers can take differential measurements, which are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Its digital readout lcd shows inch or metric units for versatility, and allows either absolute or incremental measurement readings.

Vernier calipers are more durable than digital calipers because they do not have internal moving parts, but they can be more difficult to read. Plastic components are oil-resistant and measuring faces are carbide-tipped for durability. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements.

Mitutoyo 500-197-30 Advanced Onsite Sensor AOS Absolute Scale Digital Caliper, 0 to 8"/0 to 200mm Measuring Range, 0.0005"/0.01mm Resolution, LCD - The mitutoyo 500-197-30 digital caliper has a 0 to 8" 0 to 200mm measuring range with 00005" 001mm increments for precision and an advanced onsite sensor AOS electromagnetic inductive sensor for resistance to dirt, oil, and water. Measures inside, depth, outside, and step values for versatility. Includes protective case and SR44 silver oxide battery.

. Digital readout LCD shows inch or metric units for versatility when measuring. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements.

More information about Mitutoyo 500-197-30


Similar products



Mitutoyo 293-348-30 Digimatic Micrometer, IP65, 0-1"


Mitutoyo 293-348-30 - Lcd screen displays in inches and metric units. Measures inside, outside, depth, and step values for versatility. Includes protective case and SR44 silver oxide battery. Gives improved grip while take measurements. Calibrated micrometer measures 0 to 1" 0 to 25mm with 000005" 0001mm resolution and +/- 000005" accuracy, for taking outside diameter measurements in harsh workshop conditions.

Anti-slip finish. Advanced onsite sensor AOS electromagnetic inductive sensor for resistance to dirt, oil, and water. Ratchet stop to help provide uniform pressure for precise, repeatable measurements. Electromagnetic absolute sensor with improved resistance to environmental conditions such as dirt, oil and water that can cause false readings.

Mitutoyo 293-348-30 Digimatic Micrometer, IP65, 0-1" - Measures 0 to 8" 0 to 200mm in 00005" 001mm increments for precision use. Digital readout LCD shows inch or metric units for versatility when measuring. Plastic components are oil-resistant and measuring faces are carbide-tipped for durability. Mic, 0-1", digimatic, IP65. Ingress protection certified IP65 for protection against dust and water.

More information about Mitutoyo 293-348-30


Similar products



Mitutoyo 182-105, Steel Rule, 6" X 150mm, 1/32, 1/64", 1mm, 1/2mm, 3/64" Thick X 3/4" Wide, Satin Chrome Finish Tempered Stainless Steel


Mitutoyo 182-105 - Ratchet stop to help provide uniform pressure for precise, repeatable measurements. Anti-slip finish. Measures inside, depth, outside, and step values for versatility. Includes protective case and SR44 silver oxide battery. Mitutoyo steel rule, 1mm, 1/2mm, 6" x 150mm, 1/64", 3/64" thick x 3/4" wide, 1/32, satin Chrome Finish Tempered Stainless Steel Calibrated micrometer measures 0 to 1" 0 to 25mm with 0.

00005" 0001mm resolution and +/- 000005" accuracy, for taking outside diameter measurements in harsh workshop conditions. Clear easy to see graduations. Lcd screen displays in inches and metric units. Tempered stainless steel. Plastic components are oil-resistant and measuring faces are carbide-tipped for durability.

Mitutoyo 182-105, Steel Rule, 6" X 150mm, 1/32, 1/64", 1mm, 1/2mm, 3/64" Thick X 3/4" Wide, Satin Chrome Finish Tempered Stainless Steel - Electromagnetic absolute sensor with improved resistance to environmental conditions such as dirt, oil and water that can cause false readings. Digital readout LCD shows inch or metric units for versatility when measuring. Gives improved grip while take measurements. Ingress protection certified IP65 for protection against dust and water.

Satin chrome finish.

More information about Mitutoyo 182-105


Similar products



Machinist's Thin Parallel Bar Set - 10 Pair 1/8" X 6"


TFT Tools - Clear easy to see graduations. Gives improved grip while take measurements. Includes 10 pairs of the following heights: 1/2", 1", 5/8", 3/4", 1-3/8", 1-1/4", 1-1/8", 7/8", 1-1/2" & 1-5/8". Made from high quality tool steel- stress relieved against distortion, precision ground and hardened Parallel and accurate within +/-.

0002" and made from high quality tool steel- stress relieved against distortion, precision ground and hardened. Lcd screen displays in inches and metric units. Digital readout LCD shows inch or metric units for versatility when measuring. Satin chrome finish. Measures inside, outside, depth, and step values for versatility.

Machinist's Thin Parallel Bar Set - 10 Pair 1/8" X 6" - Includes protective case and SR44 silver oxide battery. Our part # all-54100 Tempered stainless steel. Advanced onsite sensor AOS electromagnetic inductive sensor for resistance to dirt, oil, and water. Thin parallel set 1/8" 10 Pair 00003" steel calibrated micrometer measures 0 to 1" 0 to 25mm with 000005" 0

001mm resolution and +/- 0

More information about TFT Tools


Similar products



Hornady C1000 Lock-N-Load OAL Length Gauge Straight


Hornady C1000 - Plastic components are oil-resistant and measuring faces are carbide-tipped for durability. Measures 0 to 8" 0 to 200mm in 00005" 001mm increments for precision use. Regulating seating depth and the resulting "jump" to the rifling is widely regarded as fundamental to improved accuracy. One of the best kept secrets in accurate reloading is precise bullet seating depth.

You will need a modified Case sold separately to fit your firearm's chamber and thread it onto the gauge. Digital readout LCD shows inch or metric units for versatility when measuring. Red housing tube is made of aluminum. Anti-slip finish. Lcd screen displays in inches and metric units. Each parallel is 1/8" thick x 6" long with 2 holes.

Hornady C1000 Lock-N-Load OAL Length Gauge Straight - Satin chrome finish. Includes 10 pairs of the following heights: 1/2", 1-3/8", 5/8", 1-1/8", 7/8", 3/4", 1-1/4", 1", 1-1/2" & 1-5/8". Made from high quality tool steel- stress relieved against distortion, precision ground and hardened Parallel and accurate within +/-. 0002" and made from high quality tool steel- stress relieved against distortion, precision ground and hardened.

A few thousandths of an inch change between the bullet and the rifling can make the difference between average accuracy and real tack-driver performance. Our part # all-54100

More information about Hornady C1000


Similar products



Mitutoyo"2416S" Dial Indicator, 4-48 UNF Thread, 0.375" Stem Dia,"Lug Back," White Dial, 0-100 Reading, 2.244" Dial Dia, 0-1" Range, 0.001" Graduation, -0.002" Accuracy


Mitutoyo 2416S - The company was founded in tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL. What's in the box?dial indicatorlimit markers metric only 2Bezel clampStorage box Calibrated micrometer measures 0 to 1" 0 to 25mm with 000005" 0001mm resolution and +/- 000005" accuracy, for taking outside diameter measurements in harsh workshop conditions.

Choice of flat or lug back for a variety of mounting options. Our part # all-54100 Electromagnetic absolute sensor with improved resistance to environmental conditions such as dirt, oil and water that can cause false readings. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial.

Mitutoyo"2416S" Dial Indicator, 4-48 UNF Thread, 0.375" Stem Dia,"Lug Back," White Dial, 0-100 Reading, 2.244" Dial Dia, 0-1" Range, 0.001" Graduation, -0.002" Accuracy - It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. Optional features include jeweled bearings for high sensitivity and accuracy, dustproof, waterproof, shockproof, a white or black face, a revolution counter to measure overall change, and reverse reading for depth or bore gage measurement.

Dial indicators are also called dial gauges, dial calipers, and probe indicators. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Lcd screen displays in inches and metric units.

More information about Mitutoyo 2416S


Similar products



Hornady 044606 Sure-Loc Lock Ring Per 6


Hornady 044606 - Quantity: 6 per package. Standard dial indicator with a 0375" diameter stem, and choice of white or black face, a #4-48 UNF contact point thread mount, for measuring surface variations in fractional inches. Units displayed in fractional inches, and has a rotating bezel and limit markers. Electromagnetic absolute sensor with improved resistance to environmental conditions such as dirt, oil and water that can cause false readings.

Red housing tube is made of aluminum. Our part # all-54100 Clear easy to see graduations. Choice of flat or lug back for a variety of mounting options. Regulates seating depth and the resulting "jump" to the rifling. Plastic components are oil-resistant and measuring faces are carbide-tipped for durability. Lcd screen displays in inches and metric units.

Hornady 044606 Sure-Loc Lock Ring Per 6 - Satin chrome finish. Stem design provides long clamping range, no through screw-hole on the frame for dust- and water resistance, and involute curved lifting lever provides smooth movement of spindle and dovetail joint for tool-less connection. Lets you make precise adjustments of all standard 7/8 inch -14 dies and accessories.

Ratchet stop to help provide uniform pressure for precise, repeatable measurements. Each parallel is 1/8" thick x 6" long with 2 holes.

More information about Hornady 044606


Similar products



Hornady AB1 Lock-N-Load Anvil Base Kit


Hornady AB1 - Each parallel is 1/8" thick x 6" long with 2 holes. Electromagnetic absolute sensor with improved resistance to environmental conditions such as dirt, oil and water that can cause false readings. Plastic components are oil-resistant and measuring faces are carbide-tipped for durability. Easier to obtain ogive measurements.

Advanced onsite sensor AOS electromagnetic inductive sensor for resistance to dirt, oil, and water. You will need a modified Case sold separately to fit your firearm's chamber and thread it onto the gauge. Gives improved grip while take measurements. The anvil base kit attaches to the opposite blade of your caliper to provide a larger surface area for easier ogive and headspace measurement.

Hornady AB1 Lock-N-Load Anvil Base Kit - Our part # all-54100 Includes 10 pairs of the following heights: 1/2", 5/8", 1-3/8", 3/4", 1-1/8", 7/8", 1-1/4", 1", 1-1/2" & 1-5/8". Made from high quality tool steel- stress relieved against distortion, precision ground and hardened Parallel and accurate within +/-. 0002" and made from high quality tool steel- stress relieved against distortion, precision ground and hardened.

Choice of flat or lug back for a variety of mounting options. Tempered stainless steel. Hornady ab1 lock-n-load Anvil Base Kit option for Bullet Comparator.

More information about Hornady AB1


Similar products



Model: DG61003 AUTO Power: On/Off mag.Base Holding Power: 176 Ibs Regular Duty - NOGA Dial Gage Holder Magnetic Base


NOGA DG61003 - Measures inside, depth, outside, and step values for versatility. Includes protective case and SR44 silver oxide battery. Measures 0 to 8" 0 to 200mm in 00005" 001mm increments for precision use. Gives improved grip while take measurements. Electromagnetic absolute sensor with improved resistance to environmental conditions such as dirt, oil and water that can cause false readings.

Top arm length: 3. 98". You will need a modified Case sold separately to fit your firearm's chamber and thread it onto the gauge. Increases accuracy. Noga magnetic bases are capable of a 360° rotation and offer considerable versatility. Calibrated micrometer measures 0 to 1" 0 to 25mm with 000005" 0001mm resolution and +/- 0

Model: DG61003 AUTO Power: On/Off mag.Base Holding Power: 176 Ibs Regular Duty - NOGA Dial Gage Holder Magnetic Base - 00005" accuracy, for taking outside diameter measurements in harsh workshop conditions. Regulates seating depth and the resulting "jump" to the rifling. Includes 10 pairs of the following heights: 1/2", 3/4", 5/8", 1-1/8", 7/8", 1-1/4", 1", 1-3/8", 1-1/2" & 1-5/8". Made from high quality tool steel- stress relieved against distortion, precision ground and hardened Parallel and accurate within +/-.

0002" and made from high quality tool steel- stress relieved against distortion, precision ground and hardened.

More information about NOGA DG61003


Similar products